trackless transfer cart for outdoor and indoor operation 200t

Transfer cars move products from one place lane to another and can be either manual or automatic. And this video will be shown our automatic transfer car capacity of 10 tons, Transfer cars can travel long distances and may be more cost-effective than chain transfer. It can achieve 360 degrees of flexible turning, forward, backward, left and right rotation, speed regulation, emergency stop, and safety warning lights, It has simple functions and smoothes running. the operation is small and is not restricted by any space environment, It is widely used in various industries.

Trackless transfer cart for the transport of coils 30 ton, is my company’s low-voltage rail power supply flat car, low-voltage rail flat car is the use of voltage regulator to lower the electricity to the human body voltage 36v to the track, so that even if the personnel touched the track will not be an accident, and then through the wheels to take electricity to the body of the voltage booster This is the simple principle of low-voltage track. Trackless transfer cart for the transport of coils 30 ton is suitable for long-distance, harsh, transport situation work, save the battery and charging time, can 24 hours of non-stop operation, but for the track laying requirements are high, it is recommended that the new plant construction when put into the track laying, the track to do insulation treatment. Can be a lot of unnecessary trouble, trackless transfer cart for the transport of coils 30 ton is recommended for customers who need to weigh more than 5 tons (T) to choose. Small tonnage is still recommended to use the battery power supply is more convenient and comfortable.

The trackless transfer cart with warning horn 50t can be driven without fuel, which is not available in any fuel vehicle. This feature is not only suitable for in-plant but also for short-distance transportation, the main features are as follows.
1、Environmental protection and energy saving, low running cost.
2、Low investment and high return rate.
3, high performance, with high-tech sustainable development of great potential.
At present, Trackless transfer cart with warning horn 50t is widely used in automobile production, shipbuilding, mold stamping, mining transportation, steel deployment, large machinery and equipment delivery and assembly, etc.

Trackless transfer carts for merchandise 200t are designed to transport heavy goods or equipment from one workshop in a factory to another. It can be used indoors or outdoors. It mainly includes frames, brushless DC motors, reducers, wheels, batteries, chargers, etc., including metallurgy, casting, new plant construction and shipbuilding. We come in different styles and standard capacities, up to 300 tons, and we have the solutions you need, each style can be designed for your specific application.

These trackless transfer cart with emergency stop 1-500 tons 90 m and 40 m heavy roller conveyors for steel mills were conceived and built to achieve maximum working flexibility. Because they do not have a predetermined path, they can be turned in any direction, moving on any type of floor. These trackless transfer cart with emergency stop 1-500 tons are very useful for transporting heavy loads to places that are not accessible by cranes.

Trackless transfer cart with v frame 6t takes lead-acid battery as energy source, control module as control core; motor as original power; handle and remote control as input means; steering wheel to guide the direction and fixed wheel to carry the weight together; reducer to amplify the torque and provide power to fixed wheel; LED alarm as working and warning sign With the intelligent charger as the external power input: With the above functions, the trackless transfer cart with v frame 6t working capacity is formed together.

The main application of trackless transfer cart for outdoor and indoor operation 200t;trackless transfer cart for outdoor and indoor operation 200ts for brick factories, kiln factories, refractory factories, ceramic factories and roasting factories;Electric transport vehicles for engineering, tunnel and sanitation, electric dump trucks, electric sanitation clearing vehicles, etc.Electric transport vehicles and electric dump trucks are also used in flour mills, mineral processing plants, foundry mills, chemical plants, furnace materials factories, farms and so on.

Trackless transfer cart ce-certified 120 ton With high operation security and good flexibility, our heavy loads transfer vehicle can be applied to high-temperature, high use frequency, and medium-distance or long-distance transportation applications.
This series of heavy loads transfer vehicle uses rails instead of cable wires to offer power. It is safer and more reliable to use. In addition, It can transport on the curved track, circular track, or diverting track. Its application brings great convenience to transportation layout arrangement in factories.

Trackless transfer cart long service life 10 ton is easy to operate, with the assistance of the track, only with the control of the flat car in and out, there is a trackless vehicle relative to the track car, trackless that is no track, trackless transfer cart long service life 10 ton operation Relying on manual manipulation, the direction and route of operation also by manual control, manipulation operation is relatively difficult, but after familiar with the operation, trackless car can be turned at the origin, and not limited by the rail car and slip wire, this car can reach any place.

Advantages Trackless Transfer Cart Remote Control

Load capacity, table size, and rail gauge can be customized on request.
Power supply mode: Battery-powered, cable-powered, low voltage rail-powered, busbar powered.
Options: Warning light, radar detector, remote controller, electrical parts.
Run on rail or floor.
12 months warranty.
After-sale service provided, engineer available overseas.

Trackless transfer cart for warehouses 5 tons is mainly applied with dynamic lifting and transporting water billet car, etc.; electric kiln loading cart and electric kiln discharging cart for brick factory, kiln factory, refractory factory, ceramic factory, roasting factory, etc.; electric transportation cart for engineering, tunnel, sanitation, electric tipping cart, electric sanitation cleaning cart, etc. Electric transporters and electric dumpers are also used in flour mills, mineral processing plants, foundries, chemical plants, furnace plants, farms, etc.

Trackless transfer cart with ac motor 90 ton adopts Perfect independent research and development of remote control function, which can improve the efficiency of the operator’s use and ensure the safety of the staff. The technician tailor-made the table size 5000*3200 according to the customer’s demand, and the car is equipped with hooks at four corners, which can be flexibly turned left and right in 360 degrees, and can climb the small slope of the workshop doorway of the trackless transfer cart, which has the advantages of high conveying quality, low noise, no pollution and other products.
Perfect Transfer Cart can design and customize various specifications and models of electric flat car spare parts according to the demand of electric flat car users, for the majority of customers to update, replace or modify the electric flat car, reducing the user’s investment costs.

5 Ton ladle transfer cart Is one kind of ladle transfer cart, It can move freely from bay to bay on the cement floor asphalt pavement and epoxy floor, etc, from the production line to the warehouse. all of our design goals are meeting every client’s requirements and needs. The trackless transfer car’s load capacity and table size can be customized according to the client’s requirements and needs, Till now we can design and produce a 2-150 Ton Load Trackless Transfer Car. When the customer’s transportation space limits, we can also design the trackless transfer cart for vertical and horizontal movement.

Trackless transfer cart for freight rail 90 tons is composed of frame, battery, DC motor, reducer, rubber covered wheel, electrical control system, it can travel without laying track, it can transport goods to different places, so that the place of transportation is not limited, it is equipped with brake device on the wheel, it can stop immediately when the power is off, its stable and safe performance is very high, it can realize uninterrupted, turn while walking, making the operation more convenient, it is more popular when transporting materials in factories and workshops.

Trackless transfer cart for marble slab transport 30 tons is used for multiple workshops across the transport, which is more convenient than the rail flat car and can greatly improve the work efficiency. With the customer’s demand as the service concept, the electric flat car is manufactured by heart, continuous improvement, strong design team independent research and development design to overcome technical problems, Trackless transfer cart for marble slab transport 30 tons is successfully put into use on a trial basis, Trackless transfer cart for marble slab transport 30 tons The trackless transfer cart for marble slab transport 30 tons is divided into rubber wheel electric leveling cart and pneumatic wheel electric leveling cart according to the different tires, which are widely used in the fields of automobile production, shipbuilding, mold stamping, steel blending, and the transportation and assembly of large machines and equipment.

Trackless transfer cart with flat tread steel wheels 25 tons in a factory. First of all, it is a rail transport vehicle that needs to be laid on the ground. Tracks are generally I-shaped surfaces in contact with tracks; secondly, it is an electrically driven vehicle that is decelerated by an electric motor. Driven by the machine, it runs automatically. Again, it is a flatbed truck with a flatbed table without a lid. In special cases, it can also be non-planar, but without a lid. The body has no steering wheel and only moves forward and backward (even when turning, it rotates on the track).

Trackless transfer cart for sale 200t, as the name implies, does not need to transfer pieces, loading and other workpieces, is a special type of electric flat car, mainly using polyurethane covered rubber wheels. As a factory and workshop crossover, trackless rubber wheel electric flat car can not only go straight, but also turn and walk, which greatly improves the convenience of regional transportation and solves the trouble of many enterprises in transporting goods in different directions.
Trackless transfer cart for sale 200t As a kind of handling equipment in industrial workshops, different styles of trackless electric flat carts solve the transportation work of various workshops and plants.

The transportation of material workpieces within the handling car, more and more manufacturers use electric flat car to complete, the following we introduce the characteristics of the trackless electric flat car.
Compared with the rail flat car, Trackless transfer cart for sale 200t gets rid of the dependence on the rail and realizes the flexibility and freedom of mobile operation. It is used for conveying materials at factory sites and workshops, which is faster and more convenient, saving time and reducing costs.

Trackless transfer cart with flat deck 120 ton electrical engineering control system consists of: control power switch, DC transformer machine equipment, warning light, conductive transfer device, the key effect is to produce the working voltage necessary for the operation of the electric flat deck.
The difference between the Trackless transfer cart with flat deck 120 ton and the hydraulic lift rail trolley is whether it runs on rails or not. The hydraulic lift rail car can turn on the track, but not as much as the trackless transfer cart with flat deck 120 ton moves on the ground. trackless transfer cart with flat deck 120 ton does not need to consider the track laying requirements, the cost of the track and the costs. The trackless transfer cart with flat deck 120 ton has no running route and is more friendly to road conditions. It can run on concrete figure ground, tempered ground, etc. It can achieve 360 degrees and also has a certain climbing ability depending on traction power.
Trackless transfer cart with flat deck 120 ton key has transmission manipulation device, electric engineering manipulation device, cart wheel, window frame composition.
Trackless transfer cart with flat deck 120 ton transmission control system consists of motor, reducer, roller drive belt, braking device and brake control board, the key effect is to drive the electric flat car on the track forward glide.

Heavy load mold transfer cart is one of our common and mature product, which is customized as per customers’ true need. Such as power supply, control system, operation system, track or no track, steerable, wheelstype, cart frame structure and so on, and then provide proper solution to you. This video will be shown that Perfect cart for heavy load mold. If you have any questions, please feel free to contact us.

Trackless transfer cart with warning horn 75t is also known as over-span car, electric flat car is a kind of wheeled transport equipment that can be steered at will by manual control, because it adopts high strength polyurethane rubber wheels as driving wheels and bearing wheels, it gets rid of the dependence of the track car on the ground track, and can walk directly on the ground without destroying the infrastructure.
Trackless transfer cart with warning horn 75t can turn 360 degrees flexibly, with forward, backward, left turn, right turn button, speed control button, emergency stop button, abnormal light indication, power on light indication, authority key and other control buttons. Trackless transfer cart with warning horn 75t has the advantages of simple operation, smooth turning and easy maintenance. Its tonnage, table size, power supply mode, technical requirements can be non-standard customized

Trackless transfer cart iso certified 1-500t with lead-acid battery as energy source, control module as control core, operation handle and remote control as input means, load cargo on the table, steering wheel to guide the direction and and fixed wheel to jointly carry the weight, motor to provide the original power, reducer to amplify the torque and provide to Fixed wheel power, LED sound and light alarm as work and warning signs, and intelligent charger as external power input. With the above functions, together the trackless transfer cart iso certificated 1-500t has the ability to work. In addition to the advantages of easy operation, large starting torque, smooth driving and silent steering, the trackless transfer cart iso certified 1-500t also has the advantage of its structure, it is not constrained by the track and can be steered left and right in a flat field, which is easy to use.

Trackless transfer cart with scissor lift 400 ton is to be composed of power supply, drive mechanism, steel load bearing frame, steering, travel mechanism, control module and fault diagnosis module. You can choose battery, discharge motor or cable as the power supply of the trackless electric flat car. The series of flat cars are equipped with warning and detecting devices, which immediately issue alarms and automatically stop when encountering objects, and the cars are equipped with automatic intelligent chargers.
1. The choice of battery as the power source can make the cost lower and easier.
2. Can also be installed according to user needs positioning device, device, lifting platform and other auxiliary devices, can be equipped with PLC, to achieve fully automated control.
3. Can be customized according to user needs for frequency conversion start, anti-rollover, lift, wifi wireless communication, scanning, fixed-point stop, waterproof treatment, ultra-low table, climbing and other functional customization. Hydraulic lift railcar runs freely without external power supply and external power, mainly through the pressure transmission of hydraulic oil so as to achieve the function of lifting and lowering, which can make the aerial operation range larger and more efficient.
Trackless transfer cart with scissor lift 400 ton is rated between 0-400T; power supply is available in four types: BTL cable-powered, BDG low-voltage rail-powered, BXC battery-powered and BJT cable reel-powered; running speed is 0-20 meters per minute; handle or wireless remote control is optional. remote control for control.

The trackless transfer cart with weighing scale 200t is battery-powered. The battery is installed in the trolley. The battery is powered by an electronic control system to the DC motor. We use this principle to operate the car, for example, starting, stopping, moving forward and backward, adjusting the speed, etc. Trackless transfer cart with weighing scale 200ts can be used for both ‘S’ and arc railways.

Trackless transfer cart for steel shop 80 tons is a steel structure with a flat steel plate on the table and a welded frame. The frame is made of steel sections, I-beams and steel plates welded together. The power supply system of the electric flat car is directly supplied with ∨360 AC power by the cable reel. The cable reel is a hysteresis coupling table, which ensures that the cable is evenly stressed and not easily pulled.
Trackless transfer cart for steel shop 80 tons own features include simple structure, easy to use, large load capacity, not afraid of dirt and smashing, easy maintenance, long service life, etc. Because of its convenient, strong, economic, practical, easy to clean and many other advantages, it has become a transport tool for transporting heavy objects within the enterprise plant and between the plant and the plant for a short distance frequently.

Trend of Trackless transfer cart with lifting arm 400 ton: With Trackless transfer cart with lifting arm 400 ton, customers can save all the costs of laying tracks and save the valuable space taken up by laying tracks. There is another advantage that customers can use it after unloading the car after purchase.

Perfect Transfer Cart is designed for bulk materials, fixed-point transportation, repeated transfer, off-site transfer and other complicated loading and unloading, as well as steering flexibility, loading and unloading, transport, hidden dangers, productivity, etc. The special electric rail flat car, flat trailer, non-powered tractor, the transfer efficiency, labor intensity, sex, is the current transfer vehicles, a very cost-effective product.
Trackless transfer cart customized size 80 tons, is a battery-powered, motor-driven transport tool for pulling goods or people. Ltd. is a company dedicated to the research and development, design, production and sales of the transport industry, the company’s annual production capacity of electric flatbed truck is strong, can produce a variety of tonnage between 1-300 tons BDG low-voltage rail type, BJT cable reel type, BHX slip wire type, BXC battery type, BTL tow cable type, BP non-powered, BWP trackless transport, BQX cable type, BQC battery type. The BDG low-voltage rail-powered electric flat car is divided into BDGS and BDGZ low-voltage rail-powered electric flat car series according to the load tonnage and power transmission source.

Trackless transfer cart for metallurgy plant 30 ton adopts box beam structure with high load factor. The whole cart adopts the organic welding of steel plate and profile, with compact structure and generous appearance. The orderly arrangement of ribs ensures the pressure-bearing capacity of the table and is not easily deformed.

Trackless transfer cart for the transport of coils 80t table size and tonnage can be customized according to the size of steel structures such as steel sections and coils, and the turning is light and flexible, which is convenient for the round-trip transfer between the production workshop and the storage place, and the protective fence and radar detection device will be added around the cart to ensure the safe and barrier-free operation of the cart.
Trackless transfer cart for the transport of coils 80t In the transfer of heavy mold products, more use trackless flat car, the series of flat car with its own flexible rotation, space-saving, large load-bearing capacity, safety and reliability and other advantages to get a lot of ke favor. It is used to transfer coils to and from the mold workshop and the working workshop, and the rubber mats are laid on the table to prevent the mold from moving.

Trackless transfer cart for polyester strapping 25 ton is a frame structure with four longitudinal beams and a number of crossbeams and paving plates welded together, usually using large channel steel as the longitudinal and crossbeams of the frame, taking eight points to carry the load, the frame is evenly stressed. The flat bearing seat on the wheel pair is connected with the frame through bolts, and this structure effectively reduces the height of the table.
The reducer of the transmission device is placed at one end of the flat car for holding the shaft, which is convenient for assembly maintenance and modification.
Trackless transfer cart for polyester strapping 25 ton is equipped with a connecting hook at the front and rear, which can pull other flat car or be pulled when necessary. Both sides of the flat car are equipped with lifting holes for easy lifting.

Product function

1、Transportation: Trackless transfer cart with flat deck 75t is a product designed for transportation, so the primary function is transportation.
2、Turning: Trackless transfer cart with flat deck 75t is equipped with steering wheels and steering control, so the control of turning is one of its main functions.
3、Lifting: Trackless transfer cart with flat deck 75t can be added with hydraulic and mechanical lifting devices according to customers’ needs, so that the lifting function can be achieved on the basis of the original one.
4、Side-turning: Trackless transfer cart with flat deck 75t can be added with hydraulic and mechanical side-turning devices according to customers’ needs to achieve the side-turning function on the original basis.
5、Table rolling: Trackless transfer cart with flat deck 75t can add rollers, rollers and other devices according to customers’ needs to achieve the function of turning cylindrical workpieces and smoothly moving flat workpieces on the original basis.
6、Other functions: The company can customize and develop the functions required by customers.