20 Tons Transfer Cart For Coil

Trackless transfer cart for aluminum factory 120 ton is equipped with safety steel plates on the outside of the wheels to prevent debris from entering the cart, The safety plates are installed on the outside of the wheels to prevent debris from entering the vehicle and to ensure the safety of the operator; The protective steel plate is easy to disassemble and install, and safe and reliable, convenient for vehicle repair and maintenance.

Trackless transfer cart for polyester strapping 25 ton is a frame structure with four longitudinal beams and a number of crossbeams and paving plates welded together, usually using large channel steel as the longitudinal and crossbeams of the frame, taking eight points to carry the load, the frame is evenly stressed. The flat bearing seat on the wheel pair is connected with the frame through bolts, and this structure effectively reduces the height of the table.
The reducer of the transmission device is placed at one end of the flat car for holding the shaft, which is convenient for assembly maintenance and modification.
Trackless transfer cart for polyester strapping 25 ton is equipped with a connecting hook at the front and rear, which can pull other flat car or be pulled when necessary. Both sides of the flat car are equipped with lifting holes for easy lifting.

Advantages Trackless Transfer Cart Remote Control

Load capacity, table size, and rail gauge can be customized on request.
Power supply mode: Battery-powered, cable-powered, low voltage rail-powered, busbar powered.
Options: Warning light, radar detector, remote controller, electrical parts.
Run on rail or floor.
12 months warranty.
After-sale service provided, engineer available overseas.

Trackless transfer cart for steel liquid 30 ton drive wheels and load wheels can choose high strength polyurethane rubber solid tires or pneumatic tires, get rid of the dependence of trackless transfer cart on the ground track, do not destroy the infrastructure, can walk on the ground at will, turn at will without space and ground restrictions, can change the direction of travel and route at any time, very suitable for use in the site of the running route is not fixed.
1、Trackless transfer cart for steel liquid 30 ton adopts crane beam type box structure, CNC cutting of steel plate and intelligent robot welding.
2、The wheels are made of solid cast steel with polyurethane rubber, which can reduce the height of the whole car and ensure the stability of operation.
3、Trackless transfer cart for steel liquid 30 ton adopts balance beam or will install support to assist its flexible turning.
4、Trackless transfer cart for steel liquid 30 ton adopts double drive to increase the power of the dolly when running.
5、Trackless transfer cart for steel liquid 30 ton adopts dual control with the handle and wireless remote control, and the handle is equipped with a directional rocker, which makes the control more convenient and flexible.
6、The table surface can be equipped with anti-slip rubber plate or wooden plate to protect the safety of the workpiece and prevent the workpiece from contacting with the car body directly to cause damage to the workpiece.

Heavy load mold transfer cart is one of our common and mature product, which is customized as per customers’ true need. Such as power supply, control system, operation system, track or no track, steerable, wheelstype, cart frame structure and so on, and then provide proper solution to you. This video will be shown that Perfect cart for heavy load mold. If you have any questions, please feel free to contact us.

Trackless transfer cart with ac motor 1-500 t has seven main technical parameters: power supply mode, load tonnage, table size, table height, track length, track spacing, and operation mode, among which the main technical parameters are power supply mode and load tonnage.

Trackless transfer cart with ac motor 90 ton adopts Perfect independent research and development of remote control function, which can improve the efficiency of the operator’s use and ensure the safety of the staff. The technician tailor-made the table size 5000*3200 according to the customer’s demand, and the car is equipped with hooks at four corners, which can be flexibly turned left and right in 360 degrees, and can climb the small slope of the workshop doorway of the trackless transfer cart, which has the advantages of high conveying quality, low noise, no pollution and other products.
Perfect Transfer Cart can design and customize various specifications and models of electric flat car spare parts according to the demand of electric flat car users, for the majority of customers to update, replace or modify the electric flat car, reducing the user’s investment costs.

Trackless transfer cart for press rooms grainger 90t is the electric flatbed truck without special track, mainly through the battery for power supply, and the configuration are maintenance-free battery, can reduce the daily maintenance of the flatbed truck. The rooms grainger 90t has no cable and fixed running track, can turn freely, and after special design configuration turning radius is relatively small, and even can achieve in situ turning, turning process is also particularly flexible, the layout of the surrounding operating area is less restrictive, can be adjusted accordingly to the uneven ground.

Trackless transfer carts for merchandise 200t are designed to transport heavy goods or equipment from one workshop in a factory to another. It can be used indoors or outdoors. It mainly includes frames, brushless DC motors, reducers, wheels, batteries, chargers, etc., including metallurgy, casting, new plant construction and shipbuilding. We come in different styles and standard capacities, up to 300 tons, and we have the solutions you need, each style can be designed for your specific application.

Trackless transfer cart for steel 25t adopts solid cast steel covered rubber wheels, Trackless transfer cart for steel 25t is customized with large load capacity without track, requiring high ground level and bearing capacity, and the direction of guidance by the steering wheel can be freely turned. Battery life is limited, there is a requirement for working time, suitable for the use of infrequent work occasions.

Product structure:
The battery flat car is composed of driving part, walking structure and control system, 80t trackless transfer car parameters, all are modular composition, simple and convenient maintenance and replacement

Product parts:
DC motor: brush motor, high torque, can be used in the use of high frequency occasions.
Brake: The brake can be divided into electromagnetic brake and holding brake, which is the common brake.
Remote control:The remote control can choose rocker control, which controls the turning direction of the flat car through the direction of the rocker.

Trackless transfer cart for marble slab transport 30 tons is used for multiple workshops across the transport, which is more convenient than the rail flat car and can greatly improve the work efficiency. With the customer’s demand as the service concept, the electric flat car is manufactured by heart, continuous improvement, strong design team independent research and development design to overcome technical problems, Trackless transfer cart for marble slab transport 30 tons is successfully put into use on a trial basis, Trackless transfer cart for marble slab transport 30 tons The trackless transfer cart for marble slab transport 30 tons is divided into rubber wheel electric leveling cart and pneumatic wheel electric leveling cart according to the different tires, which are widely used in the fields of automobile production, shipbuilding, mold stamping, steel blending, and the transportation and assembly of large machines and equipment.

Trackless transfer cart ce-certified 120 ton With high operation security and good flexibility, our heavy loads transfer vehicle can be applied to high-temperature, high use frequency, and medium-distance or long-distance transportation applications.
This series of heavy loads transfer vehicle uses rails instead of cable wires to offer power. It is safer and more reliable to use. In addition, It can transport on the curved track, circular track, or diverting track. Its application brings great convenience to transportation layout arrangement in factories.

Trackless transfer cart for warehouse 5 ton is a small and medium-sized lifting equipment with track running, mainly consists of gantry (main beam, outrigger, lower cross beam, etc.), lifting mechanism, running mechanism and electric control part, with electric hoist as lifting mechanism, running along the lower flange of main beam I-beam when working. The gantry structure is divided into box type and truss, box type technology number, easy to make, truss light weight, strong wind resistance. trackless transfer cart for warehouse 5 ton machine with light weight, simple structure, easy installation and maintenance, etc., suitable for small and medium lifting capacity range of factories, mines, yards and warehouses and other outdoor places for general loading and unloading lifting work. It is prohibited to work in flammable, explosive and corrosive gas environment. There are three operation methods, such as ground handle, wireless remote control and driver’s room.

Trackless transfer cart for sale 200t, as the name implies, does not need to transfer pieces, loading and other workpieces, is a special type of electric flat car, mainly using polyurethane covered rubber wheels. As a factory and workshop crossover, trackless rubber wheel electric flat car can not only go straight, but also turn and walk, which greatly improves the convenience of regional transportation and solves the trouble of many enterprises in transporting goods in different directions.
Trackless transfer cart for sale 200t As a kind of handling equipment in industrial workshops, different styles of trackless electric flat carts solve the transportation work of various workshops and plants.

The transportation of material workpieces within the handling car, more and more manufacturers use electric flat car to complete, the following we introduce the characteristics of the trackless electric flat car.
Compared with the rail flat car, Trackless transfer cart for sale 200t gets rid of the dependence on the rail and realizes the flexibility and freedom of mobile operation. It is used for conveying materials at factory sites and workshops, which is faster and more convenient, saving time and reducing costs.

Trackless transfer cart with scissor lift 400 ton is to be composed of power supply, drive mechanism, steel load bearing frame, steering, travel mechanism, control module and fault diagnosis module. You can choose battery, discharge motor or cable as the power supply of the trackless electric flat car. The series of flat cars are equipped with warning and detecting devices, which immediately issue alarms and automatically stop when encountering objects, and the cars are equipped with automatic intelligent chargers.
1. The choice of battery as the power source can make the cost lower and easier.
2. Can also be installed according to user needs positioning device, device, lifting platform and other auxiliary devices, can be equipped with PLC, to achieve fully automated control.
3. Can be customized according to user needs for frequency conversion start, anti-rollover, lift, wifi wireless communication, scanning, fixed-point stop, waterproof treatment, ultra-low table, climbing and other functional customization. Hydraulic lift railcar runs freely without external power supply and external power, mainly through the pressure transmission of hydraulic oil so as to achieve the function of lifting and lowering, which can make the aerial operation range larger and more efficient.
Trackless transfer cart with scissor lift 400 ton is rated between 0-400T; power supply is available in four types: BTL cable-powered, BDG low-voltage rail-powered, BXC battery-powered and BJT cable reel-powered; running speed is 0-20 meters per minute; handle or wireless remote control is optional. remote control for control.

Trackless transfer cart for warehouse handling 120t is mostly used in metallurgical industry when transferring metal ladles such as steel ladle, slag ladle, iron ladle, etc. The temperature of the outer surface of the ladle body is more than 200-300°C. Therefore, it is necessary to do heat insulation protection for electrical parts.
300 ° C or even, so the need to do thermal protection of electrical components, the dolly more laying refractory bricks insulation.
Trackless transfer cart for warehouse handling 120t can be used for lathe processing enterprises, the transport of different specifications of machine tools, can be in the machine tool production line between different stations, different workshops The series of cart has very small turning radius and can be turned arbitrarily in a narrow space, which is convenient and flexible.

Trackless transfer cart for warehouses 5 tons is mainly applied with dynamic lifting and transporting water billet car, etc.; electric kiln loading cart and electric kiln discharging cart for brick factory, kiln factory, refractory factory, ceramic factory, roasting factory, etc.; electric transportation cart for engineering, tunnel, sanitation, electric tipping cart, electric sanitation cleaning cart, etc. Electric transporters and electric dumpers are also used in flour mills, mineral processing plants, foundries, chemical plants, furnace plants, farms, etc.

Trackless transfer cart for polyester strapping 5t working principle.
　　1, Trackless transfer cart for polyester strapping 5t drive part consists of two motors, respectively, mounted on the active wheel, the other end has two universal wheel composition;
　　2, Trackless transfer cart for polyester strapping 5t running turn is to rely on the two motors of the difference in speed to achieve turning, the specific implementation is through the wireless remote control on the steering button control, press the turn left button, trackless flat car is turned to the left to run, press the turn right button, flat car is turned to the right to run. It has the function of turning while walking without interruption; the whole car has safety and easy operation performance.
　　3、Trackless transfer cart for polyester strapping 5t is equipped with brake locking device on the motor of the active wheel, which has the function of stopping when the power is off and stable safety performance.
　　4、Trackless transfer cart for polyester strapping 5t is driven by the battery installed inside the flat car to provide DC motor, with the advantages of smooth start, high starting torque, small impact on the reducer, low voltage, long service life, etc.
　　5、Trackless transfer cart for polyester strapping 5t requires cement or steel plate ground because the wheels are rubber material.
　　6、The whole car runs with safety flexibility, the running distance is not limited, and it is applied to the factory environment which does not need the track

Trackless transfer cart with flat steel deck 200 ton is affected by the length of the steel section, the dolly is mostly extra-long table platform, which can be equipped with detachable guardrails on both sides of the table to ensure that the objects will not roll down during transportation. trackless transfer cart with flat steel deck 200 ton flat steel deck 200 ton free turning, smooth driving, no limitation of transport distance, can greatly improve the efficiency.

5 Ton ladle transfer cart Is one kind of ladle transfer cart, It can move freely from bay to bay on the cement floor asphalt pavement and epoxy floor, etc, from the production line to the warehouse. all of our design goals are meeting every client’s requirements and needs. The trackless transfer car’s load capacity and table size can be customized according to the client’s requirements and needs, Till now we can design and produce a 2-150 Ton Load Trackless Transfer Car. When the customer’s transportation space limits, we can also design the trackless transfer cart for vertical and horizontal movement.

Trackless transfer cart for the transport of coils 80t table size and tonnage can be customized according to the size of steel structures such as steel sections and coils, and the turning is light and flexible, which is convenient for the round-trip transfer between the production workshop and the storage place, and the protective fence and radar detection device will be added around the cart to ensure the safe and barrier-free operation of the cart.
Trackless transfer cart for the transport of coils 80t In the transfer of heavy mold products, more use trackless flat car, the series of flat car with its own flexible rotation, space-saving, large load-bearing capacity, safety and reliability and other advantages to get a lot of ke favor. It is used to transfer coils to and from the mold workshop and the working workshop, and the rubber mats are laid on the table to prevent the mold from moving.

Trackless transfer cart with custom frames/racks 120 tons internal system works reliably, with high quality configuration parts such as reducer, motor, bearing, etc., strong structure, long service life, can be designed according to customer’s requirements. trackless transfer cart with custom The surface of frames/racks 120 tons is sandblasted and coated with three layers of high-strength anti-rust paint and two layers of top coat, which meets the requirements of environmental regulations. Technical standard of electrical system: the electrical components are made of mature products of international famous brands, the protection level of electric control box is not less than IP54, and all wiring is connected with aviation plug type simple connection, which is easy to install and maintain. Our Trackless transfer cart with custom frames/racks 120 tons is designed with welding sequence and overall grinding and correction process according to its structural characteristics, and the welding process is fixed and welded under the platform and welding fixture to ensure the shape is free of skew and has sufficient load-bearing capacity and anti-deformation capability.

Trackless transfer cart with flat deck 120 ton electrical engineering control system consists of: control power switch, DC transformer machine equipment, warning light, conductive transfer device, the key effect is to produce the working voltage necessary for the operation of the electric flat deck.
The difference between the Trackless transfer cart with flat deck 120 ton and the hydraulic lift rail trolley is whether it runs on rails or not. The hydraulic lift rail car can turn on the track, but not as much as the trackless transfer cart with flat deck 120 ton moves on the ground. trackless transfer cart with flat deck 120 ton does not need to consider the track laying requirements, the cost of the track and the costs. The trackless transfer cart with flat deck 120 ton has no running route and is more friendly to road conditions. It can run on concrete figure ground, tempered ground, etc. It can achieve 360 degrees and also has a certain climbing ability depending on traction power.
Trackless transfer cart with flat deck 120 ton key has transmission manipulation device, electric engineering manipulation device, cart wheel, window frame composition.
Trackless transfer cart with flat deck 120 ton transmission control system consists of motor, reducer, roller drive belt, braking device and brake control board, the key effect is to drive the electric flat car on the track forward glide.

Trackless transfer cart for marble slab transport 1-500t is generally powered by maintenance-free battery, which can reduce the daily maintenance of the flat car. The process is also flexible, with very little restriction on the layout of the operating area, the ability to adjust accordingly to uneven ground, the ability to rotate in place to turn around, etc. This type of model is used in multiple workshops across the transport. Compared with the rail flat car, trackless car from the dependence on the track, to achieve the flexibility of the operation, used in the factory site and workshop transport workpiece more quickly and conveniently and save time and reduce costs.
Trackless transfer cart for marble slab transport 1-500t can turn 360°, with forward, backward, left and right turn, speed regulation, emergency stop, abnormal light indication, power-on light indication, radar monitoring, etc.

Battery Powered Transfer Cart With Robot Arm is used in the assembly line for positional working, The plc system is interesting in the transfer cart to realize automated stop when moving on a station. The transfer platform of the cart can be customized with additional devices to meet the handling needs of different handling situations.

Trackless transfer cart for sale 1-300 t in the case of no external power supply, external power to run freely, mainly through the hydraulic oil pressure transmission so as to achieve the function of lifting, can make the aerial work a greater range, higher efficiency. Hydraulic lifting railcar is not subject to lifting, easy to operate, lifting freely, the height can be designed according to the size provided by the user. Its rated capacity is between 0-80T; power supply is available in BTLto cable-powered type, BDG low-voltage rail-powered type, BXC battery-powered type and BJT cable reel-powered type; running speed is 0-20 meters per minute; control by handle or wireless remote control is optional.
Trackless transfer cart for sale 1-300 t can realize fully automatic AGV handling, which can free up manpower and hands. This large-tonnage handling vehicle has the advantages of coming and going, in situ 360 degrees, etc. Not only that, because the goods are heavy, the large tonnage workshop handling trolley has the function of locking and unlocking when the trolley is running and stopped, and the trolley can only run after unlocking to prevent the hidden problems that exist under the accident. Perfect Transfer Cart’s trolley can also be installed with magnetic stripe navigation, and the trolley can be made explosion-proof and high temperature resistant according to the working conditions.

Trackless transfer cart customized color 120t is suitable for 24V, 36V, 48V, 72V, 110VDC (AC) power supply, the battery is installed in the flat car, through the electronic control system to supply power to the motor, so that the flat car start, stop, backward, 72V, direct power supply. Compared with the railed flat car, this series of flat car has the advantages of safety, flexibility, simple structure, easy to use and maintain, large load capacity, low noise, beautiful appearance, etc. It has the characteristics of safety, flexibility, safety, high efficiency, safety and environmental protection. It is used in machinery manufacturing plants, warehouses, metallurgical plants as workshop transportation or crane transportation to transport heavy objects. For example: moulds, raw materials, castings and forgings, riveted and welded parts, processed workpieces and finished products are transported, and it is the first choice for industrial AC power or long-distance transportation. It meets the technical requirements of JB/T6127 electric flat car.
Trackless transfer cart customized color 120t can not only meet the most basic transportation requirements, but also can add hydraulic lifting system according to user needs, to achieve the table lift, side flip and other functions.
Trackless transfer cart customized color 120t is operated by motor through the reducer to drive the smooth running of the flat car, running speed generally 0 ~ 20m / min. wired and wireless remote control operation. The frame adopts box beam steel or section steel welded structure.

The trackless transfer carts are designed and produced by Perfect for our customers, and a variety of models and functions are included, such as 5 tons, 10 tons, 15 tons, 20 tons, and 25 tons, trackless transfer carts for coil, mold transfer cart, industrial trailers, and lift platform. In this video, 20 tons trackless coil transfer cart will be shown. If you are interested, you can also contact us freely.

Product function

1、Transportation: Trackless transfer cart with flat deck 75t is a product designed for transportation, so the primary function is transportation.
2、Turning: Trackless transfer cart with flat deck 75t is equipped with steering wheels and steering control, so the control of turning is one of its main functions.
3、Lifting: Trackless transfer cart with flat deck 75t can be added with hydraulic and mechanical lifting devices according to customers’ needs, so that the lifting function can be achieved on the basis of the original one.
4、Side-turning: Trackless transfer cart with flat deck 75t can be added with hydraulic and mechanical side-turning devices according to customers’ needs to achieve the side-turning function on the original basis.
5、Table rolling: Trackless transfer cart with flat deck 75t can add rollers, rollers and other devices according to customers’ needs to achieve the function of turning cylindrical workpieces and smoothly moving flat workpieces on the original basis.
6、Other functions: The company can customize and develop the functions required by customers.

Trend of Trackless transfer cart with lifting arm 400 ton: With Trackless transfer cart with lifting arm 400 ton, customers can save all the costs of laying tracks and save the valuable space taken up by laying tracks. There is another advantage that customers can use it after unloading the car after purchase.