Coils Material Handling Transfer Cart

Battery Powered Coil Transfer Trolleys is adapted to transport steel coils, aluminum coils, iron roll and a series of profiles package as a delivery device.A U-shaped device shall be installed on the vehcle to prevent some roll steel coils, aluminum coils and other rolling profiles and ensure hundred percent safety during transport.

Rail mold handling coil transfer cart warehouse battery motorizeds are available with a number of drive and control systems. Drive systems include gear reducers, shaft drives and single wheel drives. Typical units are equipped with hand-held suspension controls for the operator to control the rail mold handling coil transfer cart warehouse battery motorized back and forth along the track. The average travel speed can be customized to allow the operator to operate the unit on foot with the vehicle. The pendant can be mounted on any of the four corners of the vehicle, allowing the operator to walk along the front of the vehicle during operation. Our rail mold handling coil transfer cart warehouse battery motorizeds also feature semi-automatic and fully automatic control systems to meet the needs of specific applications.

5 tons electric coil transfer trolley automatic charging hand operated must be operated and maintained by a dedicated person, and must not be used by non-operators. Before operation, check whether there are any obstacles on the track, and whether the electrical wiring and control switches are safe and reliable. The 5 tons electric coil transfer trolley automatic charging hand operated on the track must ring to start smoothly, pay attention to whether there is an abnormality around, and be ready to stop at any time. There is no collision with the stop at the end of the track. Rapid changes in direction of travel are not allowed. It is strictly forbidden to maintain and clean the 5 tons electric coil transfer trolley automatic charging hand operated during operation. Overloading is not allowed when loading articles. Projects should be evenly distributed. In the event of a sudden power failure, the control switch should be reset to zero. At the end of the work, the power supply must be cut off, the load must be removed and the equipment must be cleaned.

The large load coil transfer cart has reached a wide range of applications in new or rebuilt enterprise factories and plants, and is also used in the internal transportation of some large equipment plants and workshops.
This kind of large load coil transfer cart has a common characteristic, that is, “short”. Short to what extent? The height of the car is only twenty to thirty centimeters. But its load is not small, from a few tons to dozens of tons are available. Although the car “short”, but it is fully functional, high security. Leakage protection, under-voltage protection, etc. Everything is a lot. Some also realize the automation control.
Large load coil transfer cart can also realize the turn on the track, when the turn is less than 40 degrees can be set using the rail turnout form. When the bending curvature is greater than 40 degrees, it is necessary to set a turntable rotary mechanism at the turn, so that the turn can be realized.

In order to meet the needs of steel transportation, we have designed a variety of electric power billet coil transfer car for steel plants to make transportation more convenient and use frequent. More importantly, multi-point security protection not only improves the safety factor, but also has been praised by customers around the world.Electric power billet coil transfer car for steel plants can be used for non-short-distance transportation and there is no frequency limit for use.
Its application scope includes port transportation, automotive field, steel, steel, heavy industry, light industry, chemical industry, mining, shipbuilding, engineering, aerospace, coal, nuclear energy, water conservancy engineering and so on. This cable reel blank transfer vehicle obtains AC 380v power through a cable reel device mounted on the bottom of the car. The motor is controlled by a power supply via the AC motor control system. Through the principle, we can make the billet transfer trolley start, stop, forward, backward and so on.

The large dimension heavy load industrial steel coil railway trolley cable reel power has the following advantages.
1. Large dimension heavy load industrial steel coil railway trolley cable reel power cannot rely on guiding devices.
2. Large dimension heavy load industrial steel coil railway trolley cable reel power can be driven in both directions and steered 360 degrees
3. Large dimension heavy load industrial steel coil railway trolley cable reel power with DC drive and large load capacity.
4. Large dimension heavy load industrial steel coil railway trolley cable reel power with small turning radius and flexible operation
5. Large dimension heavy load industrial steel coil railway trolley cable reel power small braking distance, safe and reliable.
6. Large dimension heavy load industrial steel coil railway trolley cable reel power the steering mechanism runs smoothly and is easy to maintain.

100t industrial material transfer carts, turning coil transfer cart on cement floor is driven by battery, battery pack is today’s prosperous energy, many products will use battery instead of human resources staff, rail flatbed carts do not need to install external wires, also do not Need to be connected to a long line for charging, the choice is the intelligent charger, fill the full automatic power off, do not worry about the battery charge bad, can be used for parallel lines, arcs, curves and other walking, so as to avoid the cable is too long and bring safety hazards.
It is 100t industrial material transfer carts from the track, turning coil transfer cart on cement floor, no cable line restrictions, so the requirements for laying the track is high, the number of times used is not limited, but can not be used in rusty, dusty places, the vehicle is safe to use, speed can be controlled, easy to operate, can not be used in rusty, dusty places.

There are many transfer carts needed in the transportation industry, 50t battery powered coil transfer carts, the structure is somewhat replicated, so the completion period is relatively long, if the urgent need will bring you certain problems, today to introduce you, simple and affordable electric flat car.
50t battery powered coil transfer carts operating system voltage safety, 50t battery powered coil transfer carts on the hydraulic lifting system can be added; can be added to the PLC system to achieve fully automated control, suitable for higher temperatures and harsh environment, due to its simple structure, low cost, is a common transfer vehicle for short distance across the vehicle in the workshop.

Electric aluminium coil transfer cart wireless remote control Customizable
Appearance:Table Size, Table Material, Table type, Rated Load, Color, Wheel Base,Detachable structure etc.
Special Function: Hydraulic Lift Table, Dumpling, Climbing, V shape, PLC control system, Automatic Positioning, clamping device, Anti-explosion, Heat-proof function, Weighting system etc.
Safety Device: Alarm light, Emergency stop button, Radar detector, Buffer, V shape support, Guardrails etc.
Special Design: Round corner, Hold pendant box, Lifting hole etc.

50 tons copper mine coil transfer cart is widely used in various factories and industries, such as assembly line (ring production line, grinding production line), metallurgical industry (steel ladle), bearing transportation, shipbuilding industry (maintenance, assembly, container transportation), workshop workpiece transportation, lathe transportation, steel mills (steel structure such as billet, steel plate, steel coil, steel pipe, profile, etc.), Construction (bridges, simple buildings, concrete, concrete columns), oil industry (oil pumps), pumping rods and parts), energy (polysilicon, generators, windmills), chemical industry (electrolytic tanks, burners, etc.), railroads (track maintenance, welding, tractors).

battery operated hydraulic lifting system steel coil trailers material handling equipment has the ability to work smoothly, anti-collision coordination, running distance is not limited, through the motor speed control motor to provide power low noise, strong carrying capacity can save human capital and costs, the operation will not produce exhaust emissions, environmental protection effect is practical and convenient, no special requirements for the track, this is the characteristics of these products, but in the use of the time or to pay attention to a point.
battery operated hydraulic lifting system steel coil trailers material handling equipment is a flat car running on the track with a battery, equipped with a power switch, the battery is installed in the flat car, the switch power supply according to the power system to the traction motor power supply start, stop, forward, reverse, shift, etc..

Battery power 25 ton on rails aluminium coil transfer car exterior dimensions
The shape and size of the flatbed car should first be selected according to the workpiece to be transported, the larger the better.
Too much material is wasted and the cost is relatively high. If the contact surface between the transported workpiece and the battery power 25 ton on rails aluminium coil transfer car table is flat, the battery power 25 ton on rails aluminium coil transfer car form factor is better set and the table size should be slightly larger than the transported workpiece size.

Steel Coil Transport Trolley is a type of coil transfer vehicle that runs on track. It can be powered by batteries, low-voltage tracks, cable drums, busbars, towed cables, etc. These types of coil carriers usually have V-frames or E-frames mounted on the transport platform, which prevent material from rolling down the coil carrier. V-frames or E-frames can be divided into two types: detachable or non-removable.

The 5 tons battery powered coil transfer cart remote control move on cement floor Is A Battery-Powered Transport Handling Flat Trolley Car Device. The Driving Distance Of The Series Of Transport Coil Carts Are Not Limited, And The Requirements For Track Laying Are Not High.
1. The Special Track Load Tonnage That Is Laid On The Ground Is Large.
2. Suitable For Materials To Be Transported Or Transported Within A Fixed Range.
3. Carrying Tonnage, Size, Function Can Be Customized.
4. The Choice Of Power Supply Mode Can Be DC, AC, And Low Voltage.
5. Application Of High Temperature, Cold, Spray Booth, Sandblasting Room, Etc..

Aluminium coils handling 15t platform transfer cart is a kind of large tonnage load railcar used in the factory workshop, which needs to lay the track when using, aluminium coils handling 15t platform transfer cart is driven by motor and reducer. The aluminium coils handling 15t platform transfer cart is driven by an electric motor and reducer and travels on a track, with the on-board control box controlling the start, stop, forward and backward movement of the truck. The aluminium coils handling 15t platform transfer cart has a box beam structure, all welded by steel plates, with a load factor of 150%, strong load capacity, the size of the platform can be customized, the number of loads, no need to operate, relatively low labour costs, with low-voltage rail, cable reel, battery, slip wire A variety of power supply methods, flexible style, can be selected according to the working conditions of the workshop.

Explosion proof electric coil transfer flatbed cart for spray booths are widely used in construction, steel mills, shipyards, foundries and other fields, and can also be combined with other functions, such as lifting, tilting, weighing systems, etc. The frame uses two longitudinal beams and several beams to make the table face evenly stressed and not deformed. Polishing, dust removal, make the appearance beautiful. Through our understanding and site investigation, through our process design, fire-resistant bricks and heat-resistant fabrics are added to the surface of the trolley to effectively isolate high temperatures. The transmission of logistics temperature can protect the electrical components very well, and the customer is very satisfied.

The 20 tons steel coil transfer carts are designed to handle and transport large payloads efficiently and safely. They can handle a variety of materials such as coils, industrial piping, molds, heavy equipment and structural steel, commonly found in manufacturing plants, chemical plants, warehouses, metallurgical plants and more.

20 tons steel coil transfer carts can help you improve workflow and productivity, reduce potential damage during load transport and improve load visibility.

25t electric remote control steel coils handling crane tracks trailer, workpiece with castings, working temperature of 500 degrees.
25t electric remote control steel coils handling crane tracks trailer according to the user’s requirements, the reducer and motor are protected by heat insulation rock wool, and there are safety devices for stopping when people are encountered at both ends of the car body, the detection distance is 0.3~3 meters, and the detection distance is adjustable.
In order to make the 25t electric remote control steel coils handling crane tracks trailer get better protection, a fender is added on the platform of the dolly, aiming to make the low voltage electric flat car can better lay another layer of sand.

Industrial Coil Transfer Carts are ideal for transporting coils throughout your facility without limitations from track length and distance. Industrial Coil Transfer Cart is designed with two swivel and two driven wheels.Track mounted transfer cart travels along a fixed path.

Coils Material Handling Transfer Cart used to transport metal coils, rolls and other cylindrical loads from one area of your facility to another across smooth to semi-smooth floors.Coils Material Handling Transfer Cart also be used in conjunction with overhead cranes in your workshops to handle and transport loads between crane bays.

12 tons heavy duty automatic coil transfer cart electromagnetic brake stepless speed, DC motor speed regulation drive technology, multi-wheel hydraulic steering technology and wire control and remote control dual operation mode. Solid rubber wheels operate directly on the ground, operate without site restrictions, and will not damage the ground. Bidirectional drive and 360° in-situ rotation are also possible.
Applications: Aerospace, military, machinery manufacturing, automotive industry, heavy industry manufacturing, mold manufacturing, engineering machinery, shipbuilding, port yards, steel plate distribution, iron and steel metallurgy, mining transportation and other industries.

20 tons motorized coil transfer trolley move on railway is a kind of trackless material handling trolley. It is powered by storage battery. The battery is installed in the handling trolley.

Cable drum radio control 800t coil transfer carriage is mainly used for modern operational handling equipment, heavy duty accessories, its simple operation, stable operation, in a variety of industries has been widely used.
Cable drum radio control 800t coil transfer carriage has seven main technical parameters: power supply mode, load capacity, table size, table height, rail length, rail spacing, running mode, the main technical parameters are loading mode and loading mode, and determine the power supply type of cable drum radio control 800t coil transfer carriage, the specifications are determined according to the loading tonnage.
The main technical parameters of cable drum radio control 800t coil transfer carriage are seven: power supply mode, loading capacity, table size, table height, rail length, rail spacing, combined operation mode electric flatbed carriage, whose main technical parameters are power supply mode and loading tonnage, using cable drum radio control 800t coil transfer carriage, determine its type, and determine its specifications according to loading tonnage.

5 ton rolled and lifting coil transfer cart can be used to handle aluminum coils, steel coils, paper rolls, copper coils, rolls, fuel tanks and factory pipelines. This 5 ton rolled and lifting coil transfer cart can be designed as a cost-effective, safe and flexible load movement alternative. V-shaped/U-shaped supports and rollers can be installed to avoid coils falling off battery-powered trolleys.

The 20m/min 1000t road hydraulic lifting coil transfer cart has a very strong load carrying capacity and uses a box beam welded structure to effectively prevent the transfer cart from deforming under heavy load, which will be of great help to the development of industrial or manufacturing industries to increase the transport of factories, workshops, warehousing and logistics.
The environmentally friendly and efficient 20m/min 1000t road hydraulic lifting coil transfer cart is of great help to everyone. 20m/min 1000t road hydraulic lifting coil transfer cart has a very high load carrying capacity and uses a box beam welding structure to effectively The 20m/min 1000t road hydraulic lifting coil transfer cart prevents deformation under heavy loads and is available in capacities from 1 to 300t, depending on the customer’s needs.

The flat q235 battery powered 15-ton coil transfer cart series can be customised according to the size, weight, ambient temperature and external temperature of the package, as well as according to different requirements and drawings provided by the customer.
The flat q235 battery powered 15-ton coil transfer cart is a special model with a V-bracket and a Kun wheel bracket, which prevents the rolling and falling off of the material. Other materials. The flat q235 battery powered 15-ton coil transfer cart can be used in a wide range of applications and in harsh environments, depending on the conditions of use in the workshop, the size and weight of the material.

The battery powered trackless coil transfer cart is a trackless material handling cart, which means that the cart can be moved on concrete floors without the need to install tracks. battery powered trackless coil transfer cart transfer cart has at least two casters that allow for 360 degree motorized rotation without any damage to the floor. It is powered by battery, so it can rotate freely without any ropes. The battery powered trackless coil transfer cart is controlled by push buttons and speed controls for forward and reverse, left and right turns. PLC control system can also be added to achieve full automation.

Coil transfer cart on rubber wheel is not only free but also can realize automatic charging, the automatic charging of Coil transfer cart on rubber wheel is divided into offline charging and online charging. The coil transfer cart on rubber wheel can automatically run to the charging low point for charging, and the charging equipment can be connected automatically, while online charging is the opposite of offline charging. When the power of the coil transfer cart on rubber wheel falls below 20% of the total amount during normal operation, the coil transfer cart on rubber wheel will automatically run to the charging point to recharge itself. However, online automatic charging is limited to RGVs and AGVs, and manual remote control of the flatcar is not available, so it is also called intelligent charging.

Workshop light alarm q235 25t rail coil transfer cart is a kind of wheeled transport equipment, with handle, remote control, table, fixed wheels together, walking and turning at will, not restricted by space and ground, can run in the route is not fixed occasions, the cart are equipped with safety warning and safety detection device, encounter pedestrian or The chain should be adjusted to a suitable tightness and flexibility, the chain spring should be installed on the outside, the open end should be opposite to the direction of movement and should not touch the chain cover or crank. If the chain is tight, adjust the chain nut counterclockwise as above to move the rear wheel slightly forward.

Small platform industrial rail-mounted rail coil car with lifting device has a simple structure, easy to use, large load capacity, no fear of dirt, easy maintenance, long service life, etc., due to its convenience. Sturdy. Economical. Practical. Easy to clean and many other advantages, it is the first choice for transporting heavy objects within the production workshop of the enterprise and between the workshop and the factory room and the workshop for short distances.
Scope of application: stamping. Welding. Painting. General assembly paint. Electric flatcars. General assembly paint.
Small platform industrial rail-mounted rail coil car with lifting device mainly used in mobile lifting trucks, etc.; brickworks. Kiln plants. Refractory plants. Ceramic plants. Electric kiln loaders for roasting plants, etc.. Electric kiln discharge trucks, etc.; engineering. Electric cleaning trucks for sanitation, etc.; construction. Electric furnaces. Electric furnaces, etc.
The small platform industrial rail-mounted rail coil car with lifting device is also suitable for grinding mills, mineral processing plants, foundries, chemical plants, dumps, farms, etc. Electric flatbed trucks without fuel drive, a feature not available in any fuel vehicles, this feature is not only suitable for factories but also for short distance transport.