coil transfer cart rail transport platform

The 5 tons battery powered coil transfer cart remote control move on cement floor Is A Battery-Powered Transport Handling Flat Trolley Car Device. The Driving Distance Of The Series Of Transport Coil Carts Are Not Limited, And The Requirements For Track Laying Are Not High.
1. The Special Track Load Tonnage That Is Laid On The Ground Is Large.
2. Suitable For Materials To Be Transported Or Transported Within A Fixed Range.
3. Carrying Tonnage, Size, Function Can Be Customized.
4. The Choice Of Power Supply Mode Can Be DC, AC, And Low Voltage.
5. Application Of High Temperature, Cold, Spray Booth, Sandblasting Room, Etc..

The battery powered trackless coil transfer cart is a trackless material handling cart, which means that the cart can be moved on concrete floors without the need to install tracks. battery powered trackless coil transfer cart transfer cart has at least two casters that allow for 360 degree motorized rotation without any damage to the floor. It is powered by battery, so it can rotate freely without any ropes. The battery powered trackless coil transfer cart is controlled by push buttons and speed controls for forward and reverse, left and right turns. PLC control system can also be added to achieve full automation.

Coil Railway Transport Vehicle is also known as a railway transport trolley, which is one kind of special transfer trolley. Coil Railway Transport Vehicle is used to transport one coil in the wokshop from one bay to another.

Heavy load capacity coil transfer cart has the safety performance and mobile and flexible performance, can travel on curves, turnouts, running distance is not limited. It has no requirement for track insulation, convenient auxiliary track, low cost and simple operation, and can run long distance indoors and outdoors, which is very convenient for factory transportation and plan arrangement.
Heavy load capacity coil transfer cart suppliers produce heavy load capacity coil transfer cart, whether no load or heavy load, are low even start, so that not only conducive to mechanical transmission, but also to protect all kinds of electrical appliances, invariably extend the service life of the flat car. Mainly suitable for long distance cargo transportation, easy to lay the track, simple operation, can be used on any track of the same gauge.

The 20m/min 1000t road hydraulic lifting coil transfer cart has a very strong load carrying capacity and uses a box beam welded structure to effectively prevent the transfer cart from deforming under heavy load, which will be of great help to the development of industrial or manufacturing industries to increase the transport of factories, workshops, warehousing and logistics.
The environmentally friendly and efficient 20m/min 1000t road hydraulic lifting coil transfer cart is of great help to everyone. 20m/min 1000t road hydraulic lifting coil transfer cart has a very high load carrying capacity and uses a box beam welding structure to effectively The 20m/min 1000t road hydraulic lifting coil transfer cart prevents deformation under heavy loads and is available in capacities from 1 to 300t, depending on the customer’s needs.

Single Coil Transfer Cart is more often used in workshops to transport loads from one area to another since Single Coil Transfer Cart can be designed with any load capacity, ideal for heavy duty applications. Besides, the rail does not have to be as insulated as rail powered cart.

The 40 tons warehouse battery power aluminum coil transfer cart is mainly used in the small space of the workshop, helping the factory to transfer larger materials in the workshop more safely, efficiently and with high frequency, saving space and human resources for material transfer inside the factory, thus saving costs and improving efficiency, as well as being safer and more environmentally friendly.
Perfect Transfer Cart Company is dedicated to the transportation of goods within the factory floor, and can provide professional service solutions according to the needs of your factory and the actual situation of your application.

Workshop light alarm q235 25t rail coil transfer cart is a kind of wheeled transport equipment, with handle, remote control, table, fixed wheels together, walking and turning at will, not restricted by space and ground, can run in the route is not fixed occasions, the cart are equipped with safety warning and safety detection device, encounter pedestrian or The chain should be adjusted to a suitable tightness and flexibility, the chain spring should be installed on the outside, the open end should be opposite to the direction of movement and should not touch the chain cover or crank. If the chain is tight, adjust the chain nut counterclockwise as above to move the rear wheel slightly forward.

coil transfer cart customized 1-500 ton busbar powered,We can design coil transfer cart according to the workshop application,V-shape frame supporting and roller can be removable from the coil transfer car.Each of our transfer cars can be customized according to your needs 1-500 ton.

Explosion proof electric coil transfer flatbed cart for spray booths are widely used in construction, steel mills, shipyards, foundries and other fields, and can also be combined with other functions, such as lifting, tilting, weighing systems, etc. The frame uses two longitudinal beams and several beams to make the table face evenly stressed and not deformed. Polishing, dust removal, make the appearance beautiful. Through our understanding and site investigation, through our process design, fire-resistant bricks and heat-resistant fabrics are added to the surface of the trolley to effectively isolate high temperatures. The transmission of logistics temperature can protect the electrical components very well, and the customer is very satisfied.

The flat q235 battery powered 15-ton coil transfer cart series can be customised according to the size, weight, ambient temperature and external temperature of the package, as well as according to different requirements and drawings provided by the customer.
The flat q235 battery powered 15-ton coil transfer cart is a special model with a V-bracket and a Kun wheel bracket, which prevents the rolling and falling off of the material. Other materials. The flat q235 battery powered 15-ton coil transfer cart can be used in a wide range of applications and in harsh environments, depending on the conditions of use in the workshop, the size and weight of the material.

Railway electric flat bed trailer for steel foil coils handling with v-frameruns on steel rails or steel square bars. It is commonly used to transfer heavy loads between shops or from shop to warehouse. Used in steel plants, aluminum plants, plastic tube plants, etc. to transfer round materials from the production line to the warehouse.

railway electric flat bed trailer for steel foil coils handling with v-frame,Can be customized, can recommend suitable power supply for customers according to their work site, can be battery power supply, cable reel power supply, busbar power supply, slide rail power supply, towing cable power supply, etc

In order to meet the needs of steel transportation, we have designed a variety of electric power billet coil transfer car for steel plants to make transportation more convenient and use frequent. More importantly, multi-point security protection not only improves the safety factor, but also has been praised by customers around the world.Electric power billet coil transfer car for steel plants can be used for non-short-distance transportation and there is no frequency limit for use.
Its application scope includes port transportation, automotive field, steel, steel, heavy industry, light industry, chemical industry, mining, shipbuilding, engineering, aerospace, coal, nuclear energy, water conservancy engineering and so on. This cable reel blank transfer vehicle obtains AC 380v power through a cable reel device mounted on the bottom of the car. The motor is controlled by a power supply via the AC motor control system. Through the principle, we can make the billet transfer trolley start, stop, forward, backward and so on.

Small platform industrial rail-mounted rail coil car with lifting device has a simple structure, easy to use, large load capacity, no fear of dirt, easy maintenance, long service life, etc., due to its convenience. Sturdy. Economical. Practical. Easy to clean and many other advantages, it is the first choice for transporting heavy objects within the production workshop of the enterprise and between the workshop and the factory room and the workshop for short distances.
Scope of application: stamping. Welding. Painting. General assembly paint. Electric flatcars. General assembly paint.
Small platform industrial rail-mounted rail coil car with lifting device mainly used in mobile lifting trucks, etc.; brickworks. Kiln plants. Refractory plants. Ceramic plants. Electric kiln loaders for roasting plants, etc.. Electric kiln discharge trucks, etc.; engineering. Electric cleaning trucks for sanitation, etc.; construction. Electric furnaces. Electric furnaces, etc.
The small platform industrial rail-mounted rail coil car with lifting device is also suitable for grinding mills, mineral processing plants, foundries, chemical plants, dumps, farms, etc. Electric flatbed trucks without fuel drive, a feature not available in any fuel vehicles, this feature is not only suitable for factories but also for short distance transport.

3 ton galvalume coil transfer carts can be used in a variety of applications, such as light explosions, high temperatures, ferries …… DC motors, smooth starting, high starting torque, low impact on the gearbox, low voltage, long life …… Such transfer coil baskets are powered by batteries, so they are fully charged and can run freely, regardless of distance.

The Radio remote control wire coil 30t trackless transfer cart is becoming increasingly popular for its flexibility, economy and versatility. The radio remote control wire coil 30t trackless transfer cart has a small turning radius and can be rotated freely in 360°. The 30t trackless transfer cart generates little noise during operation and is easy to handle and safe.

Battery power 25 ton on rails aluminium coil transfer car exterior dimensions
The shape and size of the flatbed car should first be selected according to the workpiece to be transported, the larger the better.
Too much material is wasted and the cost is relatively high. If the contact surface between the transported workpiece and the battery power 25 ton on rails aluminium coil transfer car table is flat, the battery power 25 ton on rails aluminium coil transfer car form factor is better set and the table size should be slightly larger than the transported workpiece size.

Coil Transfer Cart 70 Ton for Steel Coil Handling Indoor is a space-saving, ergonomic transfer cart that helps you reduce the use of forklifts and overhead cranes to move and handle large payloads, while increasing safety.The Coil Transfer Cart 70 Ton for Steel Coil Handling Indoor provides safe, smooth and efficient transport of heavy and oversized loads in manufacturing environments.

Steel roll mover electric heavy coil transfer cart is applied in basic occasions to reduce the output of redundant laborers. There are also unique occasions with high risk, high temperature and explosion-proof type regulations, such as automobile paint booths and sandblasting rooms, which can be worked more reasonably.
The long-distance transportation of large and medium-sized goods, as the long-distance transportation of lifting equipment is not an option, the electric railcar chooses electromagnetic energy to show mechanical energy, so it is more environmentally friendly, and the electric railcar can complete the automation technology, saving labor and time. The long-distance transportation of large and medium-sized goods, due to the long-distance transportation of lifting equipment can not be selected, the electric rail car choose electromagnetic energy to show mechanical energy, so more environmentally friendly, steel roll mover electric heavy coil transfer cart can complete the automation technology, save energy and time.
Steel roll mover electric heavy coil transfer cart has a simple structure, high application level, strong bearing capacity, not afraid of dirt, simple maintenance and long service life. It has the advantages of compact structure, strong bearing capacity, beautiful and generous design, accurate positioning, high automation technology program process, simple actual operation, stable turning and driving, strong climbing degree, long driving distance, low noise, easy maintenance, remote control, etc. It is suitable for various transportation natural environment.

The aluminium product manufacturing industry coil transfer cart on rail uses the battery as the power source to provide power for the DC traction motor and drive the flat car. Aluminium product manufacturing industry coil transfer cart on rail has the following advantages: no insulation requirements for the track, the driving distance is not limited, can drive on curves and turnouts, maneuverable and flexible, can be interchanged between multiple tracks, high safety performance, wide range of application. The car has the advantages of easy to use, strong bearing capacity, durability, convenient maintenance and long service life. The frequent handling of heavy loads in and between factories has become a means of transportation for many enterprises.

The advantages of the remote control coil handling carts are: no cables, not only safer, but also not afraid of smashing, not afraid of hot, does not hinder cross-transportation, easy to realize remote control and automalization, can be driven on curved roads and circular roads, and the number of transformers can be increased without being flat. The limitation of the running distance of the vehicle is very convenient for the transportation plane layout of the plant.

The 40 ton large load coil transfer cart is battery driven, controlled by handle and remote control, and can be pushed forward manually when the equipment is fed or malfunctioned. 40 ton large load coil transfer cart can be automatically cut off when charging is finished. The cart supplier said that it can not be subject to the constraints of running distance, giving the plant transportation layout to facilitate, greatly increasing the scope of operation.
40 ton large load coil transfer cart has a battery to provide power directly to the traction DC motor. DC motor compared with AC motor has the advantages of not easily damaged, large starting torque, and strong overload capacity.

Coils Material Handling Transfer Cart used to transport metal coils, rolls and other cylindrical loads from one area of your facility to another across smooth to semi-smooth floors.Coils Material Handling Transfer Cart also be used in conjunction with overhead cranes in your workshops to handle and transport loads between crane bays.

Perfect Transfer Cart offers rail traverser ferry-heavy duty coil transfer cart, Perfect Transfer Cart manufactures rail traverser ferry-heavy duty coil transfer Perfect Transfer Cart’s rail traverser ferry-heavy duty coil transfer cart can be used for various applications such as cargo handling and rail transportation. Cargo transportation and rail transportation ferries can also be used at the same time. Usually, the ferry transfer car is divided into two sections: upper and lower body, one section is used for transferring and one section is used for ferrying. At the same time, we have a professional and excellent team to make three-layer body according to your needs to meet the requirements of the work site. It is widely used in metallurgy, machinery manufacturing, heavy manufacturing, mold manufacturing, steel plate distribution, building materials handling and other industries.

battery operated hydraulic lifting system steel coil trailers material handling equipment has the ability to work smoothly, anti-collision coordination, running distance is not limited, through the motor speed control motor to provide power low noise, strong carrying capacity can save human capital and costs, the operation will not produce exhaust emissions, environmental protection effect is practical and convenient, no special requirements for the track, this is the characteristics of these products, but in the use of the time or to pay attention to a point.
battery operated hydraulic lifting system steel coil trailers material handling equipment is a flat car running on the track with a battery, equipped with a power switch, the battery is installed in the flat car, the switch power supply according to the power system to the traction motor power supply start, stop, forward, reverse, shift, etc..

25t electric remote control steel coils handling crane tracks trailer, workpiece with castings, working temperature of 500 degrees.
25t electric remote control steel coils handling crane tracks trailer according to the user’s requirements, the reducer and motor are protected by heat insulation rock wool, and there are safety devices for stopping when people are encountered at both ends of the car body, the detection distance is 0.3~3 meters, and the detection distance is adjustable.
In order to make the 25t electric remote control steel coils handling crane tracks trailer get better protection, a fender is added on the platform of the dolly, aiming to make the low voltage electric flat car can better lay another layer of sand.

Cable drum radio control 800t coil transfer carriage is mainly used for modern operational handling equipment, heavy duty accessories, its simple operation, stable operation, in a variety of industries has been widely used.
Cable drum radio control 800t coil transfer carriage has seven main technical parameters: power supply mode, load capacity, table size, table height, rail length, rail spacing, running mode, the main technical parameters are loading mode and loading mode, and determine the power supply type of cable drum radio control 800t coil transfer carriage, the specifications are determined according to the loading tonnage.
The main technical parameters of cable drum radio control 800t coil transfer carriage are seven: power supply mode, loading capacity, table size, table height, rail length, rail spacing, combined operation mode electric flatbed carriage, whose main technical parameters are power supply mode and loading tonnage, using cable drum radio control 800t coil transfer carriage, determine its type, and determine its specifications according to loading tonnage.

5 tons electric coil transfer trolley automatic charging hand operated must be operated and maintained by a dedicated person, and must not be used by non-operators. Before operation, check whether there are any obstacles on the track, and whether the electrical wiring and control switches are safe and reliable. The 5 tons electric coil transfer trolley automatic charging hand operated on the track must ring to start smoothly, pay attention to whether there is an abnormality around, and be ready to stop at any time. There is no collision with the stop at the end of the track. Rapid changes in direction of travel are not allowed. It is strictly forbidden to maintain and clean the 5 tons electric coil transfer trolley automatic charging hand operated during operation. Overloading is not allowed when loading articles. Projects should be evenly distributed. In the event of a sudden power failure, the control switch should be reset to zero. At the end of the work, the power supply must be cut off, the load must be removed and the equipment must be cleaned.

Automatic charging industrial coil transfer carts are mainly used to transport metal coils, pipes, beams or other round materials. We can design the capacity of the cart, the size of the table, the power supply style according to your working conditions. In order to protect the round cargo from falling, the plant automatic charging industrial coil transfer cart can be equipped with a V-bracket according to the customer’s application requirements. Automatic charging industrial coil transfer cart is an electronic material handling tool for coil transportation. This type of track bogie is usually equipped with a V-shaped or E-shaped frame on the transfer bogie platform. Those V-shaped or E-shaped frames prevent the material from slipping off the rail bogie. V-frame or E-frame can be divided into two types: movable or inactive.

Steel Coil Transport Trolley is a type of coil transfer vehicle that runs on track. It can be powered by batteries, low-voltage tracks, cable drums, busbars, towed cables, etc. These types of coil carriers usually have V-frames or E-frames mounted on the transport platform, which prevent material from rolling down the coil carrier. V-frames or E-frames can be divided into two types: detachable or non-removable.