rail handling cart

Rail guided motorized vehicle, also known as electric flatbed car, electric flatbed car, flatbed car, straddle car, ground crawler, etc.. It is an in-plant rail guided motorized vehicle. First, it is a rail vehicle, need to lay the track on the ground. The track is generally an I-beam contact network; secondly, it is an electrically controlled vehicle, which runs automatically under the drive of motor reducer. Once again, it is an electric flat car with a flat bottom and no carriage cover. Special circumstances can also be non-flat but no carriage cover, the body has no steering wheel, only the front and rear direction (even if the turn depends on the track).
Rail guided motorized vehicle has the characteristics of simple structure, easy to use, large carrying capacity, not afraid of dirty, not afraid of smashing, easy maintenance, long service life, etc.. Due to its advantages of convenience, sturdiness, economy, practicality and easy cleaning, it is the first choice for short-distance fixed-point and frequent transportation of heavy loads between factories and plants.

The rail electric cart is a motorized transport vehicle used for heavy transport in factories and workshops. The electric truck has flexible performance, simple operation, strong bearing capacity and stable operating mechanism.

Steel coil rail transport cars are usually designed with V-decks for handling and transporting coils and drums. It is capable of handling heavy loads of up to 150 tons. Compared to other equipment such as forklifts, steel coil rail transport cars are a more cost-effective solution for transporting heavy loads in your facility. It makes your big work simple, safe and efficient. Our transfer vehicles can be customized to suit your load transport and application requirements.

Heavy duty rail carts are mainly used to solve the problem of mobility in tight spaces. Thanks to all possible steering procedures, on one or different axles, with our heavy duty rail carts, you can achieve a true tight turning radius. The propulsion of our heavy duty rail carts can be battery-driven (for in-plant load transport) or diesel-driven (for long distances). When moving heavy equipment, the transfer vehicle will improve material handling.

Material transfer equipments on rails are mounted on rails and are used to shuttle along a fixed path. Standard trolleys are DC powered. Since these are semi-custom manufactured carts, they are available in lengths and widths suitable for the application. Capacities up to 300 tons.
Material transfer equipment on rails can be designed as semi-manual or fully automatic, depending on the requirements of the application. Transfer carts can also be part of an automated crane system for moving goods, materials or products to and from manufacturing processes or storage locations.

Automated transfer cart shuttles provide reliable and efficient load transfer for a variety of applications such as aluminum anodizing, paper roll storage, and general manufacturing, and can be customized to fit. Automated transfer carts reduce labor costs, optimize manufacturing processes and reduce the capital costs associated with forklift systems. The end result is increased production and throughput.

The power of the motorized railway transfer cart comes from the dragging cable, the truck obtains the AC 380V power supply from the cable, to the electrical control system, using this principle to operate the start and stop of the truck.

Flat electric rail transfer cart is a kind of electric railed in-plant transportation vehicle to solve the product transportation between the span of the plant, also called electric flat car, low voltage rail flat car.
The rail flat car is controlled by AC metallurgical motor through AC control system, which makes the flat car start, stop, forward and backward. It can be used in S-type track, curved track and high temperature occasions, the flat car can be equipped with hydraulic lifting system, lifting system, with security and mobility flexibility, the track laying requirements are high (need insulation treatment track), suitable for large load capacity, medium and long distance transport occasions. Widely used in machine building and metallurgical plants, as a workshop with the crane transport heavy objects across the use.

Battery powered rail cart is a rail-type transport vehicle that is widely used in steel mills, foundries, manufacturing plants, engineering and general workshops for material handling. Heavy loads on the platform are transported along the track from one station to another, depending on the actual needs. With a load capacity of up to 300 tons and customizable platform dimensions, heights, spans and control methods, it is a flexible and reliable electric transfer vehicle for heavy transport vehicles.

The advantage of the overhead rail trolleys is that it does not use cables, not only safe, but also not afraid of being burned, not afraid of smashing, not hindering cross transportation. Easy to remote control and automation. It can be driven in curves and roundabouts. There is no need to appropriately increase the number of buck transformers. Limited by the flat car distance, the factory traffic layout is very convenient. With its own intelligence and automation, electric rail transfer vehicles meet the different needs of different industries. Whether it is anti-corrosion, fireproof, dustproof, explosion-proof, or precision and flexibility, it can be easily handled, successfully liberating manpower, avoiding harm to the human body in a harsh working environment, greatly improving production efficiency and saving labor costs.

There is a popular railway transfer bogie, popular for its low cost, environmental protection and is a good alternative to forklifts. Especially battery power, many factories are interested in it, have replaced the old material conveying equipment from different industries, such as production lines, workshops, ports, indoor, outdoor transportation, etc., not only for the company to reduce costs, but also to eliminate labor problems.

Rail transfer trolleys are used for transport. A rail transfer trolley is a rail-type transport vehicle that is widely used in the handling of materials in steel mills, foundries, manufacturing plants, engineering and general workshops. It runs along the track according to actual needs, transporting heavy loads on the platform from one place to another. The weight of the pallet vehicle is 300 tons, and the size, height, span and control mode of the platform can be customized. It is a flexible and reliable heavy-duty transport vehicle.

Rail transfer ladle car is a type of rail transfer vehicle used to transport specific high-temperature ladles. Due to high temperature and safety, the body material, transmission system requirements, electrical control requirements, etc. of the translation vehicle.

Our range of rail traveling transfer cart is designed and manufactured to meet the needs of a wide range of industries such as steel, aluminium, automotive, heavy duty manufacturing and more. These material transport vehicles are designed to run on floor-mounted tracks for transporting heavy materials in areas where crane carriers or bridge cranes do not provide services

Rail trolley for warehouse plays an important role in transportation in industrial plants and improves the efficiency of industry.
Rail trolley for warehouse is controlled by AC system, which makes the trolley start, stop, forward and backward. The flat car can be equipped with hydraulic lifting system and lifting system, with safety and motorized flexibility, high requirements for track laying, suitable for large load capacity, medium and long distance transportation occasions, suitable for high frequency factory transportation, as a collaborative tool with heavy transport in the workshop.

For horizontal load transfer of a wide range of materials, we offer the heavy-duty, high-quality railway battery transfer wagon solutions you need. Use of heavy transport vehicles: transporting goods along assembly lines; transferring materials from one workstation to the next; storing and transporting production throughout shifts. They can even be used as stable but removable machine bases.

Battery Powered Transfer Cart 5T for industrial, the transfer cart can be powered by battery, busbar, cable reel, or slip wire. Transfer Carts are perfect for handling tasks in industrial workshops indoors or out the door. Transfer Trolley can be customized from 1-500 tons.

Rail guided vehicle for smaller loads, manual carts can be dedicated to specific workplace activities, such as shuttling materials. This often makes the cart easier to use. Transfer trucks are better suited to moving long loads through restrictive passages or doorways. For heavier loads, the transfer truck is an excellent affordable option due to its ability to handle heavy loads. The transfer vehicle has a compact design and is suitable for use in areas with a limited footprint. Another advantage over forklifts is how to customize the cart deck to suit a specific load.

rail handling Carts are perfect for narrow spaces.The rail handling cart can work in low-height spaces, as they do not require aerial elements or suspended elements when moving on the ground. That makes them safer to operate.

Railway transfer wagon frame is welded from steel, plus the walking mechanism, transmission mechanism, DC motor and power extraction device, under the control of the control system, the operation of the rail car is realized. The whole transfer vehicle. Because of the lack of cables, not only safe, but also not afraid of hot, not smashed, not interfering with cross-transport. Easy to remote control and automation. It can be driven in curves and roundabouts. Appropriately increase the number of step-down transformers, not limited by the driving distance of the flat car. The traffic layout of the factory is very convenient.

Advantages of Trackway Automated Guided Vehicle

High Security
No noise
Simple structure
Easy maintenance
Any loading capacity
Non-standard custom

China rail cart has the advantages of simple structure, convenient operation, convenient maintenance, large load capacity, less pollution and the like. Battery power transfer carts have always been a popular and mature material transfer equipment. It has become a new favorite in the field of global industrial transportation, and will be carried out with cranes for workshop handling and increased work efficiency. Excellent rail transfer vehicle can be used in industrial plants, ports, workshops, production lines and other transport coils, molds, steel, workpieces and so on. All solutions are designed according to the real needs of customers.

Rail equipment trolleys are a kind of electric railed in-plant transportation vehicles, which solve the problem of product transportation between in-plant spans, also called electric flat cars and low voltage rail flat cars.
Rail equipment trolleys are controlled by AC metallurgical motors through AC control system to start, stop, move forward and backward. It can be used in S-type track, curved track and high temperature occasions, the flat car can be equipped with hydraulic lifting system, lifting system, with security and mobility flexibility, the track laying requirements are high (need insulation treatment track), suitable for large load capacity, medium and long distance transportation occasions. Widely used in machine building and metallurgical plants, as a workshop with the crane transport heavy objects across the use.

We offer a variety of transfer trolleys to handle metal coils and reels. The device has three basic configurations in terms of power delivery: steel coil transfer car on rails, battery-powered steel coil transfer car, and a steel coil transfer car on rails powered by cable reels. These trolleys can be designed to handle a range of coils, from small and narrow coils to heavy duty coils for high-duty applications.Steel coil transfer car on rails: The car is suitable for transporting heavy loads in high-load applications. It is also ideal for long-distance transport. The track needs to be insulated.

The industrial transfer cart is a flat car with a flat surface and no hatch cover. In special cases, it can be non-flat and without hatch cover. This kind of car has the characteristics of simple structure, easy to use, large carrying capacity, no dirty and no fight, easy maintenance, long service life, etc. Because of its convenience, lightness, economy, practicality, easy to clean and many other advantages, it has become the first choice for the transportation of frequent loads at short distance fixed points within the enterprise and between the factory and the plant.

Rail battery electric flatbed cart, also known as rail transfer cart, electric rail transfer trolley, transfer cart for workshop, is a kind of factory rail electric handling vehicle, first of all it is a rail type transport vehicle, need to lay the track on the ground, the track is generally I-beam surface contact track; secondly it is an electrically driven vehicle, in the motor reducer drive under the automatic operation.
Again it is a kind of flat car, table flat without compartment cover, special circumstances can also be non-flat but no compartment cover, car body without steering wheel only forward and backward direction (even if the turn has to rely on the track to turn). This kind of vehicle has a simple structure, easy to use, large load-bearing capacity, not afraid of dirty and not afraid of smashing, easy maintenance, long service life, etc., because of its convenience, strong, economic, practical, easy to clean up and many other advantages, become the first choice of transportation tools for enterprise plant internal and plant and plant and plant between the short distance fixed point frequently carry heavy things.

Rail track trolley’s rugged design, thickened welded steel plates, factory-mounted anti-deformation bearings for carrying aluminum coils and steel pipes, from one place to another, have our extensive industry experience; we have been able to catch up with a wide range of coil transfer vehicles. They occupy enough ground clearance. Customizable features such as rotary lights, table sizes, warning alarms, batteries, low-voltage rails, cable drums are available based on customer needs and applications

Rail Cart Handling Material for Heavy Material Handling Solutions The rail cart handling material is powered by a towed cable that is always placed in the middle of the track. When the transfer station is running, the external power supply is directly transferred to the motor of the electric rail transfer station by dragging the cable. If necessary, a towing cable can be selected to protect the cable from wear.

Steel mill transfer trolleys are also known as unpowered trailers. Due to the high platform and high ground height of the transfer truck, the transfer truck can operate on uneven ground such as cement floor. The tires of the transfer vehicle can be solid tires or rubber tires. Large tonnage loads can be achieved. Because it has no motive. Therefore, the transfer truck needs a forklift or engine to provide power. Unpowered rail transfer vehicles can be divided into two types: running on track and running on the ground. Running on similar or identical tracks can achieve greater loads.

Industrial rail trolley has BXC battery power supply, BDG low-voltage rail power supply, BJT cable reel power supply and BHX slip wire power supply, etc.; the track laying requirements of industrial rail trolley need to be adjusted according to the power supply and inter-plant conditions, for example: low-voltage rail power supply needs to do insulation treatment on the track; high temperature needs to do high temperature treatment, etc. Under high temperature conditions, high temperature resistant treatment is required. In addition, the customization of industrial rail trolley needs to be customized according to the specific needs of the user, and the size of the load needs to be calculated and designed by the technical staff.

The “Perfect Transfer Cart” is available in a variety of industrial transfer carts to suit the job and application. This industrial transfer trolley on rail allows clear travel to transfer loads in paint stores, quarries, warehouses and multiple workshops.

This industrial transfer trolley on rail is non-standard and designed with payloads in mind. The various parameters for considering payload include load size, point load/UDLoad, speed, length, width and height. The structure is made of IS-2062 MS structural steel and the wheels are made of alloy steel to accommodate the load and profile of the track/square bar.

The top platform can be a square bar – flat plate or a paint shop turntable or perforated plate, depending on the application.

The industrial transfer trolley on rail is powered by a cable reel, insulated shroud system and contactor power system.